sales@fluorogreen.com Made with MAGIX E-900 FluoroPac^TM Soot Blower Packing Physical Properties ASTM Method F-37 F-38 F-36 F-152 D-638 D-792 D-1700 F-36 Characteristic Sealability Creep Relaxation % Compressibility, Range % Tensil strength, PSI Elongation Specific Gravity Hardness, Shore D-2 Recovery, % Fluoroblack E-900 0.001 17.0 5-7 2400 150 2.11 66 33 Temperature and Pressure Ratings           Material Fluoroblack E-900 Pressure 1400 PSI Temperature -350^o - +500^o F Color Black This is a general guide and should not be the sole means of selecting or rejecting these materials. The above data was independently combined by: Texas Engineering Experiments Station, Materials and Structures Laboratory, Royce E Wisenbaker Engineering Research Center, Texas A&M University System, College Station, Texas 77843, 409-854-7328 and other independent sources. WARNING: The data set forth in this brochure is typical. The user’s specific application should be combined with independent study and evaluation for the material’s suitability. For recommendations please contact UFC Fluorogreen. Selecting the wrong sealing products could result in property damage and/or personal injury. We assume no responsibility for errors contained in this brochure. CONTAINS NO ASBESTOS All UFC Fluorogreen products are made in the USA. Fluorogreen E-600, Fluorogreen E-110, Fluoroblue E-140, Fluoromaroon E-250, Fluoroblack E-900 and FluoroPac are registered trademarks. Sandard Sizes 2-3/8” x 3-1/8” x 3-3/8” deep 2-3/8” x 3” x 2-3/8” deep 2-3/4” x 3-1/2” x 3-1/4” deep Working Width Temperatures to 500^o F pH: 0 - 4