sales@fluorogreen.com Made with MAGIX E-900 FluoroPac^TM Soot Blower Packing Soot blower carriages need constant monitoring and repair. High temperature steam passing by the gearbox and through the lance bearing hub causes lubricant breakdown leading to seal, bearing and gear failure. As a result, there is constant maintenance, seal leakage, equipment replacement, and operating inefficiencies. UFC Fluorogreen has produced the FluoroPac Soot Blower Packing set using E-900 to protect high temperature machinery against wear and inefficiencies. This gives FluoroPac a decisive advantage in regards to in-service life and the ability to maintain a seal while supporting the insulated feed tube. FluororPac has no wire reinforcement to wear in the feed tube and will not absorb water. With a modified “V” style configuration FluoroPac Soot Blower Packing is priced competitively and out performs more traditional lines of soot blower packing. All FluoroPac Soot Blower Packings are compression auto-molded from Fluoroblack E- 900. Fluoroblack E-900 is chemically modified containing a specially formulated electrocarbon filler material and is an excellent material for prolonged service against high concentrations of hydrofluoric acid. This combination of materials may make Fluoroblack E-900 the lowest deforming PTFE based material available. A major pulp and paper mill in the south has stated, “FluoroPac has outperformed all other packing we’ve tried”. “It’s lasted in conditions for months when other packing has only lasted days”. *E-900 is made with chemically modified PTFE. E-900 is also used to encapsulate perforated stainless steel inserts for use in Fluoroflange gaskets. Related Links: FluoroPac^TM Properties E-900 Fluoroblack Pulp and Paper Chemical Processing