sales@fluorogreen.com Made with MAGIX Fluorogreen^TM Lantern Ring Physical Properties ASTM Method F-37 F-38 F-36 F-152 D-638 D-792 D-1700 F-36 Characteristic Sealability Creep Relaxation % Compressibility, Range % Tensil strength, PSI Elongation Specific Gravity Hardness, Shore D-2 Recovery, % Fluorogreen E-110 0.007 6.0 3-4 2307 450 2.02 61 50 Fluorogreen E-600 0.009 6.0 3-4 2660 300 2.30 61 43 Fluoroblue E-140 0.007 30.0 20-35 2100 372 2.10 57 30 Fluoromaroon E-250 0.002 42.0 6-7 4521 650 2.16 59 50 Fluoroblack E-900 0.001 17.0 5-7 2400 150 2.11 66 33 Temperature and Pressure Ratings           Material Fluorogreen E-110 Fluorogreen E-600 Fluoromaroon E-250 Fluoroblack E-900 Fluoroblue E-140 Fluorobrown E-120 Pressure 1200 PSI 1200 PSI 1200 PSI 1400 PSI 800 PSI 1000 PSI Temperature -350^o - +500^o F -350^o - +500^o F -350^o - +500^o F -350^o - +500^o F -350^o - +500^o F -350^o - +500^o F Color Green Green Maroon Black Blue Tan This is a general guide and should not be the sole means of selecting or rejecting these materials. The above data was independently combined by: Texas Engineering Experiments Station, Materials and Structures Laboratory, Royce E Wisenbaker Engineering Research Center, Texas A&M University System, College Station, Texas 77843, 409-854-7328 and other independent sources. WARNING: The data set forth in this brochure is typical. The user’s specific application should be combined with independent study and evaluation for the material’s suitability. For recommendations please contact UFC Fluorogreen. Selecting the wrong sealing products could result in property damage and/or personal injury. We assume no responsibility for errors contained in this brochure. CONTAINS NO ASBESTOS All UFC Fluorogreen products are made in the USA. Fluorogreen E-600, Fluorogreen E-110, Fluoroblue E-140, Fluoromaroon E-250, Fluoroblack E-900 and Fluoroflange are registered trademarks.